The MacKenzie Sport 18′ is about size, capacity and versatility. The MacKenzie Sport 18′ works great with an outboard motor in the 3 to 5HP range.

Adding a third and fourth bench seat can increase seating to four or six. Load it up with 1500 lbs of gear and you will have 7-3/4” of freeboard. Motor, row or paddle it.

Note: Recommended motor shaft length is 15”

MacKenzie Sport Series – Speed Test
The table below details the speeds of the MacKenzie Sport models with varied loads and three different motors. The speeds were measured with a handheld GPS unit. All three motors used for this test were 10-20 years old. New motors would likely yield faster speeds.

This Mackenzie comes with a sliding bow seat, wood web seat on the stern and a contoured yoke.

Dimensions

• Length: 18′
• Beam: 40″ | 36″ (@ 4″Waterline)
• Bow Height: 24″
• Stern Height: 16″
• Center Height: 17″
• Hull width at the top of the transom: 14"

Weight:

• Fiberglass: 93 lbs
• Kevlar®: 84 lbs
• Ultralight: 76 lbs